Demand test descriptions and error codes - Avaya Support

Demand test descriptions and error codes
Investigate tests in the order presented. By clearing errors associated with the first test, errors
generated from other tests may also be cleared. Click on the link to see the full description of
the test, error codes, and recommended actions.
Order of Investigation Short Test
Sequence
Long Test
Sequence
Reset Board
Sequence
1040 Maintenance Alarms for Communication Manager, Media Gateways and Servers
test ds1-loop D/ND 1
Echo Canceller Test (#1420) X D
NPE Audit Test (#50) X ND
Control Chel Looparound Test (#52) X ND
Loss of Signal Alarm Inquiry Test (#138) X X ND
Blue Alarm Inquiry Test (#139) X X ND
Red Alarm Inquiry Test (#140) X X ND
Yellow Alarm Inquiry Test (#141) X X ND
Major Alarm Inquiry Test (#142) X X ND
Minor Alarm Inquiry Test (#143) X X ND
Slip Alarm Inquiry Test (#144) X X ND
Misframe Alarm Inquiry Test (#145) X X ND
DS1 Translation Update Test (#146) X X ND
ICSU Status LEDs Test (#1227) X X ND
SAKI Sanity Test (#53) X D
Internal Looparound Test (#135) X D
DS1 Board Loopback Test (#1209) X D
CSU Equipment Loopback Test (#1210) X D
CSU Repeater Loopback Test (#1211) X D
CPE Loopback Jack Test (#1212) X D
Far CSU Loopback Test (#1213) X D
One-Way Span Test (#1214) X D
Inject Single Bit Error Test (#1215) X D
End Loopback/Span Test (#1216) X D
1. D = Destructive; ND = Nondestructive