Demand test descriptions and error codes - Avaya Support

Communication Manager Maintenance Object Repair Procedures
2. If the ATM-EI circuit pack is absent or is present but in a PN that does not yet have PNC
connectivity to it, use the change circuit-pack command to add circuit pack
translation for the missing circuit pack.
3. Enter add atm pnc n (connection number), and administer the circuit pack location and
ATM address.
4. Enter change system-parameters duplication, and change the Enable
Operation of PNC Duplication field to y.
Removing ATM PNC Connections
Standard, Duplex or High Reliability
Note: These
Note:
systems are not equipped with PNC duplication.
1. Enter busyout atm pnc n (connection number).
2. Enter remove atm pnc n (connection number).
Critical Reliability
1. Enter status pnc, and ensure that the A-PNC is active.
If not, request a PNC interchange using the reset pnc interchange command.
2. Enter busyout pnc-standby.
3. Enter change system-parameters duplication, and change the Enable
Operation of PNC Duplication field to n.
4. Enter busyout atm pnc n (PN’s number).
5. Enter remove atm pnc n (PN’s number) to remove both ATM-EI boards, or enter
change atm pnc to remove the B-side ATM-EI board.
6. Enter change system-parameters duplication, and change the Enable
Operation of PNC Duplication field to y.
Changing Circuit Pack Location or ATM Address
Standard, Duplex or High Reliability
Note: These
Note:
systems are not equipped with PNC duplication.
1. Remove the ATM PNC connection. See Removing ATM PNC Connections.
2. Add an ATM PNC connection. See Adding ATM PNC Connections.
128 Maintenance Alarms for Communication Manager, Media Gateways and Servers