Demand test descriptions and error codes - Avaya Support

Communication Manager Maintenance Object Repair Procedures
1. Run test board location
p. Error Type 2817, 2818: DSP failure detected along the circuit path.
1. Run test board location.
2. Follow the repair procedures suggested for ATM Board DSP Test (#1293).
Error
Type
If Then
Test 598 fails Follow the repair procedures for Packet
Interface Test (#598).
Test 598 passes See PKT-BUS (Packet Bus) and
perform the specified repair.
There are no
errors against the
packet bus MO
Description
This can be a transient condition. Do
nothing now, but escalate if the error
occurs repeatedly.
2818 One or more DSPs failed. The Aux Data field contains the ID number
of DSP that failed
2817 DSP test failure. The Aux Data field contains the following information
about the failed DSPs:
X is the number of talker DSPs
Y is the number of listener DSPs
Z is the number of echo-cancelling DSPs
q. Error Type 3330: LANHO critical error. The circuit pack reports that the on-board LANHO
chip is insane (possibly due to a problem in packet bus arbitration, in the transmission line
frame, or in the circuit pack itself). The circuit pack cot talk to the packet bus.
1. Check for PKT-BUS alarms.
If Then
There is a packet bus alarm There is probably a packet bus problem,
particularly if other circuit packs on the packet
bus report the same error. See PKT-BUS
(Packet Bus) and Isolating and repairing
packet-bus faults in Maintenance Procedures for
Avaya Aura Communication Manager, Media
Gateways and Servers (03-300432) for repair
procedures.
194 Maintenance Alarms for Communication Manager, Media Gateways and Servers
1 of 2