Demand test descriptions and error codes - Avaya Support

Communication Manager Maintenance Object Repair Procedures
Error log entries and recommended actions
Table 30: ATM-BCH Error Log entries
Error
Type
Aux
Data
Associated Test Alarm
Level
On/Off
Board
Notes:
a. Error Type 0: Run the short test sequence first. If every test passes, run the long test
sequence. Refer to each appropriate test’s description, and follow its recommended
procedures.
b. Error Type 1: the two ends of the ATM trunk do not agree on the ISDN call state. Possible
causes:
● Received a DISConnect or RELease COMplete message with cause value 52
(outgoing calls barred)
● Received a DISConnect or RELease COMplete message with cause value 54
(incoming calls barred)
118 Maintenance Alarms for Communication Manager, Media Gateways and Servers
Recommended Action
0 (a) 0 Any Any Any test port location
1(b) Any test port location
18 0 busyout trunk
grp/mbr
release trunk grp/
mbr
129 (c) WRN OFF test port location
130 (d) test port location
257(e) Any Service State Audit
Test (#256)
test port location
513(f) Any WRN OFF test port location
769(g) Any Service State Audit
Test (#256)
test port location
1793 (h) Any test port location
3073(i) Any Service State Audit
Test (#256)
test port location
3585(j) Any none
3841 (k) Any WRN OFF none