Demand test descriptions and error codes - Avaya Support

Maintenance Demand Tests
System Link Status (#1647)
This test queries the circuit pack for the status of the serial link.
This test runs on S8400-BD (S8400 Server).
Table 561: System Link Status Test (#1647)
Error
Code
Test
Result
Description / Recommendation
2100 ABORT Could not allocate system resources.
1. Retry the command at 1-minute intervals up to 5 times.
2500 ABORT Internal system error
1. Retry the command at 1-minute intervals up to 5 times.
FAIL The serial link is down. This is a notification only. No action required.
PASS The serial link is up.
Power Supply Aux Signal Test (#1649)
The power supply aux signal test identifies which 655A power supply is asserting the AUXSIG
lead. The test fails if the lead is being asserted by the power supply under test.
A POW-SUP Major alarm will be generated when the AUXSIG lead is asserted in a G650 carrier
without duplicated power supplies.
A POW-SUP Minor alarm will be generated when the AUXSIG lead is asserted by a power
supply in a G650 carrier with duplicated power supplies.
The test may abort for a power supply in a carrier that does not have duplicated power supplies
since the microcontroller for the power supply may not have power when the power supply fails.
1718 Maintenance Alarms for Communication Manager, Media Gateways and Servers