Demand test descriptions and error codes - Avaya Support

DLY-MTCE (Daily Maintenance)
● Only commands that block the running of daily maintenance (add, change, duplicate,
remove, and set) are affected
● All logins will time-out if any of these commands are active for the prescribed time (except
for the “blank” option)
● The feature applies to all logins, regardless of type (init, dadmin, craft, inads) or
permissions granted to the specific login ID of an administration or maintenance user
● The corresponding “time-out” entry is appended to the list history log
The Command Time-out field can be viewed by customer administrators. A craft, init, dadmin,
or inads login is required to change the option for the field. Figure 16: change
system-parameters maintenance shows the Maintenance-related System Parameters screen
for Communication Manager.
Figure 16: change system-parameters maintenance
change system-parameters maintenance Page 1 of 3
MAINTENANCE-RELATED SYSTEM PARAMETERS
OPERATIONS SUPPORT PARAMETERS
CPE Alarm Activation Level: none
SCHEDULED MAINTENANCE
Start Time: 22 : 00
Stop Time: 06: 00
Save Translation: daily
Update LSP and ESS Servers When Saving Translations: y
Command Time-out (minutes): 60
Control Chel Interchange: no
System Clocks/IPSI INterchange: no
change system-parameters maintenance Page 3 of 3
MAINTENANCE-RELATED SYSTEM PARAMETERS
MAINTENANCE SAVE TRANSLATION CORRUPTION AUDIT
Enable Translation Audit? y
Display Warning When Detected? n
Alarm When Detected? n
Block Save Translation When Detected? n
Issue 5 May 2009 343