19.12.2012 Views

Demand test descriptions and error codes - Avaya Support

Demand test descriptions and error codes - Avaya Support

Demand test descriptions and error codes - Avaya Support

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Table 93: DS1 Facility Line Signal Equalization Values 2 of 2<br />

DS1 Converter-1 <strong>and</strong><br />

DS1 Converter-2 Line<br />

Compensation<br />

(cont’d)<br />

Equalizer<br />

Setting<br />

Distance to Network Interface (feet)<br />

Cable type 22 AWG ABAM &<br />

24 AWG PDS<br />

2 133 to 266 90 to 180<br />

3 266 to 399 180 to 270<br />

4 399 to 533 270 to 360<br />

5 533 to 655 360 to 450<br />

DS1 Converter Performance Measurements Report<br />

The DS1 Converter Performance Measurements provide link performance measurements for<br />

the DS1 facilities.<br />

When no facility alarms exist on the DS1 facility, events that indicate a degradation in the<br />

performance of the DS1 facility are monitored <strong>and</strong> recorded. These events will generate alarms<br />

when performance of the DS1 facility has degraded below acceptable levels. These<br />

measurements include <strong>error</strong>ed seconds, bursty seconds, severely <strong>error</strong>ed seconds, <strong>and</strong> failed<br />

seconds.<br />

There are two DS1 Converter Performance Measurements Sub-reports:<br />

● The DS1 Converter Performance Measurements Summary Report provides information<br />

about the worst 15-minute interval of data, the total for 24 hours of data <strong>and</strong> the current<br />

15-minute counter for each of the previously mentioned counters.<br />

● The DS1 Converter Performance Measurements Detailed Report displays a detailed log<br />

for the last 96 15-minute intervals for each of the previously mentioned counters.<br />

Access the DS1 Converter Performance Measurements Summary Report with list<br />

measurements ds1-facility summary location [print | schedule]. Access a<br />

more detailed version of the report with list measurements ds1-facility log<br />

location f [print | schedule].<br />

You can reset every hardware- <strong>and</strong> software-measurement counter for a given facility with<br />

clear measurements ds1-facility location f. The Counted Since time is also<br />

reset <strong>and</strong> the Number of Valid Intervals count is set to zero.<br />

The reports are printed on the screen or, by using the print option, on a printer attached to the<br />

terminal.<br />

362 Maintenance Alarms for Communication Manager, Media Gateways <strong>and</strong> Servers<br />

Cable type 26<br />

AWG PDS<br />

2 of 2

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!