Demand test descriptions and error codes - Avaya Support

Maintenance Demand Tests
Table 445: Failure Audit Test (#777) 3 of 3
Error
Code
Test
Result
Description / Recommendation
FAIL The SNI circuit pack reported failures or retransmitted a cleared failure
message.
1. If this is the first time this test was run, run the test again. If there
were any previous failure messages that software did not
acknowledge, this test will FAIL even if the failure messages
indicate a FAIL to PASS transition, i.e., a problem has gone away. If
this test is run twice and FAILs both times, at least one problem still
exists.
2. Enter display errors and display alarms and resolve any
errors for SNI-BD (SNI Circuit Pack), SNI-PEER (SNI Peer Link) or
FIBER-LK (Fiber Link).
3. If no SNI-BD, SNI-PEER, or FIBER-LK entries exist in the error and
alarm logs, retry the command.
PASS No problems are detected on the board.
SNC On-Board Test (#778)
This test queries the SNC circuit pack for status of the on-board background tests. These tests
include an SNC on-board microcontroller test, clock test, an SNC on-board Stratum-3 oscillator
test, and TPN microcontroller test.
1492 Maintenance Alarms for Communication Manager, Media Gateways and Servers
3 of 3