Demand test descriptions and error codes - Avaya Support

Error log entries and recommended actions
Table 31: ATM-DCH Error Log entries
Error
Type
Aux
Data
Associated Test Alarm
Level
On/Off
Board
ATM-DCH (ATM D-Chel Port)
Notes:
a. Error Type 0: Run the short test sequence first. If every test passes, run the long test
sequence. Refer to each appropriate test’s description, and follow its recommended
procedures.
b. Error Type 18: D-Chel busied out. No calls possible over this D-Chel.
c. Error Type 130: circuit pack removed or has been insane for more than 11 minutes. To
clear the error, reinsert or replace the circuit pack.
d. Error Type 1793: ATM Trunk circuit pack failed the Signaling Link Board check (#643).
Resolve any ATM-TRK (Circuit Emulation Service Circuit Pack) errors in the Error Log.
Demand test descriptions and error codes
Recommended Action
0 (a) 0 Any Any Any test port location
18 (b) 0 busyout port
location
WRN OFF release port location
130 (c) WRN ON test port location
1793 (d) Signaling Link Board
check (#643)
The command to test the ATM-DCH MO is test port location, where location is port
number 9-32.
Order of Investigation Short Test
Sequence
Long Test
Sequence
test board location l
D/ND
Signaling Link Board Check (#643) X X Nondestructive
Issue 5 May 2009 123