Demand test descriptions and error codes - Avaya Support

If Then
There are no packet bus
alarms
ATM-TRK (Circuit Emulation Service Circuit Pack)
r. Error Type 3585: Major board alarm; failure of critical components involved in the operation
of the circuit pack. The circuit pack has failed, and the switch can no longer recognize it.
1. Run test board location long.
Run the following command sequence:
1.busyout board location
2.reset board location
3.test board location long
4.release board location
The problem persists Replace the ATM-TRK circuit pack.
Aux
Data
Description
1 ATM framer chip failure
2 NCE failed
4 TDM PLD failed
5 Every DSP on the circuit pack has failed.
6 RNP (Receive Network Processor) failed
7 TNP (Transmit Network Processor) failed
8 MEMORY read/write failure
9 DUART failure
If Then
Test #1259 fails with Error Code XXYY
and XX is an AUX value in the
preceding table
The system does not recognize the
circuit pack
2 of 2
Replace the ATM-TRK circuit pack.
Replace the ATM-TRK circuit pack.
s. Error Type 3841: the ATM-TRK circuit pack received an unrecognized message from the
switch and responded with an inconsistent down-link error message.
1. Do nothing. This error does not affect service.
Issue 5 May 2009 195