Demand test descriptions and error codes - Avaya Support

Table 132: Reason Codes for status firmware station-download 2 of 2
Reason
Code
3 ABRT The terminal was not downloaded before the scheduled stop time
occurred. Schedule a new download with adequate time for the
downloads to complete, or select the continue daily option to allow the
schedule to resume the following day.
4 ABRT The terminal could not be downloaded because the schedule aborted
for an unknown reason.
5 ABRT The terminal did not respond to the download request.
6 ABRT The terminal that was added to the download list at the scheduled start
time no longer exists. This can occur when a station is removed during
an active download schedule. Download to this terminal was aborted.
18 ABRT The terminal was busied out by craft and could not be downloaded.
32 ABRT Download to the terminal timed out due to an internal error in the station
firmware download process.
1000 ABRT Terminal was in use at the time that it was to be downloaded. Download
to this terminal was aborted.
1012 ABRT An internal error occurred while preparing to download to this station.
3841 ABRT or
FAIL
Status Description
The system restarted during an active download. As a result, all
terminals that were not downloaded are marked with a status of ABORT
with this reason code. All terminals that were actively downloading
when the reset occurred are marked with a status of FAIL with this
reason code.
128 FAIL The terminal rejected the firmware because the firmware image failed
the checksum test.
129 FAIL The terminal rejected the firmware because the firmware image failed
the image validity test. The firmware image may not be the right image
for the hardware being downloaded to.
130 FAIL The terminal being downloaded could not write its flash memory.
131 FAIL A terminal in the range was translated to be a valid terminal for this
download schedule. However, the terminal is not a valid receiver of the
download.
513 FAIL The terminal was not in service at the time that it was to be downloaded.
Download to this terminal failed.
3584 FAIL The terminal rejected the firmware image.
488 Maintenance Alarms for Communication Manager, Media Gateways and Servers
2 of 2