Demand test descriptions and error codes - Avaya Support

Note: An
Note:
out-of-tolerance voltage condition may be caused by transient conditions (e.g.
board insertion or electrical noise). Voltage problems can cause serious damage
to the TN2314 or highly unpredictable failure modes. Therefore, a repeating
condition will cause a major alarm. The following Error Types 769 through 1793
represents the various system voltages and are listed below:
e. Error Type 769: Out-Of-Tolerance voltage condition for -48 VDC.
f. Error Type: 1025: Out-Of-Tolerance voltage condition for -5 VDC.
g. Error Type: 1281: Out-Of-Tolerance voltage condition for +5 VDC.
h. Error Type: 1537: Out-Of-Tolerance voltage condition for +12 VDC.
i. Error Type: 1793: Out-Of-Tolerance voltage condition for +3.3 VDC.
248 Maintenance Alarms for Communication Manager, Media Gateways and Servers