Demand test descriptions and error codes - Avaya Support

Communication Manager Maintenance Object Repair Procedures
Table 40: Error codes and Aux Data values ATM-NTWK 5 of 6
Cause
Code/
Error
Type
Aux
Data
Cause Codes Description
99 (a) Information element (IE) either non-existent or not implemented. This cause
indicates that its sending equipment received a message with an
unrecognized IE, either because the IE’s identifier(s) are undefined, or
defined but not implemented by the cause-sending equipment.
This cause indicates that its sending equipment discarded the IE. However,
the equipment could still process the message since this IE was not
required.
100 (a) Invalid contents in information element (IE). This cause indicates that its
sending equipment received and implemented an IE. However, one or more
of the IE’s fields are coded in a way that the cause-sending equipment has
not implemented.
101 (a) Message not compatible with call state. This cause indicates receipt of a
message that is incompatible with the call state.
102 (a) Recovery on timer expiration. This cause indicates that a timer’s expiration
initiated an error-handling procedure.
104 (a) Incorrect message length
111 (a) Protocol error, unspecified. When no more specific cause values apply, this
cause reports a protocol-error event.
152 Maintenance Alarms for Communication Manager, Media Gateways and Servers
5 of 6