Demand test descriptions and error codes - Avaya Support

Table 438: FIBER-LK Configuration Audit (#759) 8 of 10
Error
Code
Test
Result
Description / Recommendation
Configuration Audit (#759)
235 FAIL The SNI circuit pack (Endpoint 2) cot communicate with its neighbor.
1. Enter list fiber-link to display fiber link endpoints. The SNI
has an administered neighbor, but cot communicate with its
neighbor.
2. Check if the administered neighbor is inserted. If not, insert the
neighbor circuit pack.
3. Perform the Fiber link fault isolation in Chapter 4: General
troubleshooting in Maintenance Procedures for Avaya Aura
Communication Manager, Media Gateways and Servers
(03-300432).
236 FAIL The Endpoint 2 SNI’s administered neighbor does not match the physical
neighbor connected.
1. Enter list fiber-link to see a fiber link’s endpoints. The SNI’s
assigned neighbor is another SNI, but the SNI is physically
connected to an EI.
2. Enter list fiber-link and verify that the fiber-optic and metallic
cables are installed as administered.
237 FAIL The Endpoint 2 SNI’s administered neighbor does not match the physical
neighbor connected.
1. Enter list fiber-link to see fiber link endpoints. The SNI’s
assigned neighbor is an EI, but the SNI is physically connected to
another SNI.
2. Enter list fiber-link and verify that the fiber-optic and metallic
cables are installed as administered.
8 of 10
Issue 5 May 2009 1467