Demand test descriptions and error codes - Avaya Support

Table 307: Hybrid Circuit and Conference Circuit Test (#57) 4 of 4
Error
Code
Test
Result
Hybrid Line Local Digital Looparound Test (#58)
PASS The hybrid circuitry is transmitting properly.
1. If complaints persist, investigate by using other port tests and by
examining the station, wiring, and connections.
0 NO
BOARD
Description / Recommendation
See NO BOARD for the repair procedures.
Hybrid Line Local Digital Looparound Test (#58)
This test checks the control chel between the server and the port’s digital circuitry. The server
sends data to the on-board microprocessor and compares the data echoed back. This test is
run on HYB-LINE (Hybrid Line).
Table 308: Hybrid Line Local Digital Looparound Test (#58) 1 of 2
Error
Code
Test
Result
Description / Recommendation
ABORT Internal system error.
1. Retry the command at 1-minute intervals up to 5 times.
4 of 4
1000 ABORT System resources required to run this test are not available. The port may
be busy with a valid call.
1. Enter display port location to determine the station
extension number of the port.
2. Enter status station to determine the service state of the port. If
the port is in use, wait until it is idle before testing.
3. Retry the command at 1-minute intervals up to 5 times.
1 of 2
Issue 5 May 2009 1167