Demand test descriptions and error codes - Avaya Support

Table 141: TN2602AP IPMEDPRO Error Log Entries 3 of 3
Error Type Aux
Data
2306 (p) Any MIN ON
2561 (q) Ping Test (#1379) MIN OFF
2817 (r) Any Ethernet
Hardware Query
test (#1405)
3073 (s) Any Aggregator
Hardware Query
(#1629)
3329 (t) Any IP Address
Update (#1371)
3330(u) Any IP Address
Update (#1371)
3585 (v) 1 or 2 Verify NIC
Options Test
(#1511)
3841(w) None Inconsistent
downlink or
board error
3841(x) 4283 RTCP Monitor
Server error
3999 (y) Any None
Associated Test Alarm
Level
MIN ON
MIN ON
MIN OFF
MIN OFF
MIN OFF
IPMEDPRO (TN2602AP IP Media Resource 320)
1. Run the short test sequence first. If every test passes, run the long test sequence. Refer to each
appropriate test’s description, and follow its recommended procedures.
2. Minor alarms on this MO may be downgraded to warning alarms based on values set in set options.
Notes:
a. Error Type 1: the circuit pack has been removed from the system or is not fully
administered. The alarm is logged about 15 minutes after the circuit pack has been
removed, or 11 minutes after the SAKI test (#53) fails.
To be fully administered, a TN2602AP must:
● Have an entry on the circuit pack screen (change circuit-pack)
● Have the IP Media Resource 320 IP address administered (change node-names)
● Be enabled (change ip-interface)
On/Off
Board
Recommended Action
3 of 3
Issue 5 May 2009 521