Demand test descriptions and error codes - Avaya Support

Error log entries and recommended actions
Table 47: ATM-SGRP Error Log Entries
Error
Type
Aux Data Associated Test Alarm
Level
ATM-SGRP (ATM Signaling Group)
On/Off
Board
Recommended Action
0 0 Any Any test sig-group grp#
1 (a) Any None
18 (b) MO busied out
257 (c) Any None test sig-group grp#
769 (d) Any Primary Signaling Link
Hardware Check (#636)
1281
(e)
1793
(f)
2305
(g)
3585
(h)
3840 -
3928
(i)
Any Secondary Signaling Link
Hardware Check (#639)
test sig-group grp#
test sig-group grp#
Any Layer 2 Status Test (#647) WRN OFF test sig-group grp#
Any Remote Layer 3 Query test
(#637)
Port
number
Port
number
None
None
MIN OFF test sig-group grp#
Notes:
a. Error Type 1: switch sent a message to the far-end switch or terminal adapter, and the far
end did not respond in the time allowed. Possible causes include link failure and congestion
or outage at the far end. The Aux Data field contains layer-3 protocol information used by
internal counters.
If no other symptoms are present, no action is required.
If layer-3 communication is down, check for alarms and errors against link components.
Check out other errors against ATM-SGRP, ATM-TRK, and other hardware components on
the link. There is no test to clear these errors. The error counter is decremented by 1 every
15 minutes.
Issue 5 May 2009 171