Demand test descriptions and error codes - Avaya Support

i. Error Type 1293 and 1294: the circuit pack detected a critical hardware failure. Reset the
circuit pack with busyout board location, reset board location, and release
board location. Circuit Pack Restart Test (#594) passes, then the on-board circuitry is
healthy. Retire the alarm by entering test board location long clear. If the Circuit
Pack Restart test (#594) fails, replace the circuit pack.
The reported Error Types correspond to the following detected errors:
j. Error Type 1538: the circuit pack is hyperactive — it is flooding the switch with messages
sent over the control chel. The circuit pack is taken out of service when a threshold number
of these errors is reported to the switch. Clear the alarm by using busyout board
location, reset board location, test board location long clear, and
release board location. If the error recurs within 10 minutes, then replace the circuit
pack.
Demand test descriptions and error codes
CAUTION: If
Error Type Description
1293 On-board auxiliary processor insane
1294 Internal memory access error
Order of Investigation Short Test
Sequence
Long Test
Sequence
! CAUTION:
the TN788 Voice Conditioner circuit pack (VC-BD) is not Vintage 2 or later, it
must be replaced.
1054 Maintenance Alarms for Communication Manager, Media Gateways and Servers
D/ND
Control Chel Looparound Test (#52) X X Nondestructive