Demand test descriptions and error codes - Avaya Support

Table 67: CAB-TEMP Error Log Entries 2 of 2
Error
Type
Aux
Data
Associated Test Alarm
Level
513 (c) Power supply
temperature test (#1538)
769 (d) Power supply fan test
(#1538)
On/Off
Board
Notes
a. Error Type 1: the inlet temperature is over the threshold—120 o Fahrenheit (49 o Celsius).
Run test board and check the results of the Power Supply Temperature Test (#1537).
b. Error Type 257: the exhaust temperature is over the threshold—120o Fahrenheit (49o Celsius). Run test board and check the results of the Power Supply Temperature Test
(#1537).
c. Error Type 513: the hot spot temperature is over the threshold. Run test board and
check the results of the Power Supply Temperature Test (#1537).
d. Error Type 769: the fan alarm is active. Run test board and check results of the Power
Supply Temperature Test (#1537).
Demand test descriptions and error codes
MIN ON test enviroment location
1
MAJ test board location
MIN ON test enviroment location
test board location
1. This is a minor alarm if there is a redundant power supply, and a major alarm if there is only one power
supply.
Investigate tests in the order presented. By clearing errors associated with the first test, errors
generated from other tests may also be cleared. Click on the link to see the full description of
the test, error codes, and recommended actions.
Order of investigation Short test
sequence
Recommended Action
Long test
sequence
244 Maintenance Alarms for Communication Manager, Media Gateways and Servers
D/ND
Power Supply Temperature Test (#1537) X X Nondestructive
Power Supply Fan Test (#1538) X X Nondestructive
2 of 2