Demand test descriptions and error codes - Avaya Support

Maintenance Demand Tests
Expansion Interface Neighbor Query Test (#237)
The Expansion Interface Neighbor Query test is a request to an EI circuit pack to determine
whether it has established communication with its neighbor EI or SNI circuit pack at the
opposite end of the fiber.
For EI-to-EI fiber links, this test is run on both EI circuit pack endpoints of the fiber link. It runs on
EXP-INTF (Expansion Interface Circuit Pack) and FIBER-LK (Fiber Link).
Table 373: Expansion Interface Neighbor Query Test (#237) 1 of 2
Error
Code
Test
Result
Description / Recommendation
1033 ABORT The EI circuit pack does not have a fiber link administered to it. There is
not sufficient data to run test.
1. Enter list fiber-link to verify that there is no fiber link
administered to this circuit pack.
2. If there is no fiber administered to this circuit pack, but there should
be, add the correct fiber using add fiber-link.
3. Retry the command.
2000 ABORT Response to the test was not received within the allowed time.
1. Retry the command at 1-minute intervals up to 3 times.
2031 ABORT The attempt to send a message to the EI circuit pack failed.
1. Retry the command at 1-minute intervals up to 3 times.
2100 ABORT System resources required to run this test are not available.
1. Retry the command at 1-minute intervals up to 3 times.
2500 ABORT Internal system error
1. Retry the command at 1-minute intervals up to 3 times.
1308 Maintenance Alarms for Communication Manager, Media Gateways and Servers
1 of 2