Demand test descriptions and error codes - Avaya Support

number administered via change system-parameters maintenance. Otherwise, a
Minor alarm is raised. In either case, run the short test sequence on the alarmed GPTD port
and follow procedures for the individual test results.
b. Error Type 0: run the short test sequence first. If every test passes, run the long test
sequence. Refer to each appropriate test’s description, and follow its recommended
procedures.
c. Error Type 257: the GPTD port lost its translation. Testing the GPTD port is sufficient to
reload its translation. If testing the GPTD port does not clear the error, then replace the Tone
Detector circuit pack containing the defective GPTD port.
d. Error Type 513: the GPTD port is having problems detecting call-progress tones. If this
error is logged constantly, replace the Tone Detector circuit pack containing the defective
GPTD port.
e. Error Type 130: the circuit pack has been removed or has been insane for at least 11
minutes. To clear the error, reinsert or replace the circuit pack.
Demand test descriptions and error codes
Investigate tests in the order presented. By clearing errors associated with the first test, errors
generated from other tests may also be cleared. Click on the link to see the full description of
the test, error codes, and recommended actions.
Order of Investigation Short Test Sequence Long Test Sequence D/ND 1
Tone Detection Verification Test (#42) X X ND
Tone Detector Audit/Update Test (#43) X X ND
1. D = Destructive; ND = Nondestructive
490 Maintenance Alarms for Communication Manager, Media Gateways and Servers