Demand test descriptions and error codes - Avaya Support

DC-POWER (Single-Carrier Cabinet Environment)
S8700 Series
MO Name in Log Alarm
Level
Initial Command to Run Full Name of MO
DC-POWER MAJ test environment location
(location is the universal cabinet
number in the PORT field of the alarm log)
Two different cabinet types are supported: multicarrier and single-carrier. Single-carrier cabinets
are used only for PNs. Both cabinet types may be powered by either AC or DC external power
source. Environmental maintenance differs according to cabinet type and external power
supply. Refer to the following table to determine which MO documentation to use for
environmental maintenance.
Cabinet Type Power
Source
Environmental Maintenance Objects
The DC-POWER MO represents all environmental maintenance for single-carrier cabinets,
whether the external power supply is AC or DC. This includes the external power supply and
every Carrier Port Power Supply in an PN composed of a single-carrier cabinet stack. A Carrier
Port Power Supply provides +5, -5, and/or -48 Volts DC to the circuit packs on the carrier. The
following power supplies are used:
300 Maintenance Alarms for Communication Manager, Media Gateways and Servers
Single-Carrier Cabinet
Environment
Single-carrier
(PN)
AC or DC DC-POWER (all environmental maintenance)
Multicarrier AC AC-POWER for AC-powered systems (external power source)
POWER for AC-powered systems (battery backup)
CARR-POW (carrier port power supply)
CABINET (temperature and fan sensors)
Multicarrier DC CARR-POW (carrier port power supply)
CABINET (temperature and fan sensors)
WP-91153 Accepts AC power input
676B Accepts DC power input