Demand test descriptions and error codes - Avaya Support

Maintenance Demand Tests
Table 424: BRI Layer 3 Query Test (#629) 1 of 3
Error
Code
Test
Result
Description / Recommendation
1005 ABORT The endpoint’s MIMs Supported? field is administered to “no.”
1. Enter change station extension to change the field only if
the endpoint documentation reflects support for ISDN-BRI
Management and Maintenance Procedures.
1113 ABORT The signaling link between the switch and the endpoint or adjunct is
down.
1. Enter test port location long to clear any errors that
prevent establishment of the signaling link.
2. Examine the results of Test #626. If this test aborts or fails, follow
the repair procedure for the Signaling Link Status Test (#626).
3. Escalate problem if BRI Layer 3 Query test continues to abort.
1139 ABORT The PN’s packet bus is out-of-service.
1. Follow the repair procedures for the packet bus.
2. After completing step 1, enter test port location long, and
review the results of the BRI Port Local LAN Looparound Test
(#618) to verify the repair.
1144 ABRT The PPN’s packet bus is out-of-service.
1. Follow the repair procedures for the PPN’s packet bus.
2. After completing step 1, execute test port PCSSpp long and
review the results of the BRI Port Local LAN Loop Around test
(#618) to verify the repair.
1422 Maintenance Alarms for Communication Manager, Media Gateways and Servers
1 of 3