Demand test descriptions and error codes - Avaya Support

Table 528: MedPro Status Test (#1392) 2 of 2
Error
Code
Test
Result
Description / Recommendation
PPC Sanity Query Test (#1402)
PPC Sanity Query Test (#1402)
FAIL No MEDPRO ports in this region are in service. Every session is down.
1. Check the Error Log for errors against MEDPRO and MEDPROPT.
2. Enter test signaling-group grp# and verify the result of the
H.323 Signaling Group Ping test (#1387). If the test continues to
fail, escalate the problem. If the test passes, wait for the sessions
to come up.
PASS Every session on the Ethernet link is up.
This test queries the circuit pack for the status of the processor on the board. It runs on
IPMEDPRO (TN2602AP IP Media Resource 320).
Table 529: PPC Sanity Query Test (#1402)
Error
Code
Test
Result
Description / Recommendation
2 of 2
2000 ABORT Response was not received within the allowed time.
1. Retry the command.
2. If the test aborts again, attempt to reset the circuit pack and rerun
the test.
3. If the problem continues, replace the circuit pack.
2012
2100
ABORT System call failed.
Could not allocate the necessary system resources to run this test.
1. Retry the command.
2801 ABORT Unable to find IP address data for this location.
1. Verify that the board is administered.
1 of 2
Issue 5 May 2009 1663