Demand test descriptions and error codes - Avaya Support

_PE (Processor Ethernet) Alarms
The _PE alarms are raised for the following servers:
● S8720
● S8730
PE interface alarms
_PE 1 Minor alarm: PE Health Check device is not responding.
_PE (Processor Ethernet) Alarms
MO name in log Alarm level Alarm text Description
_PE 1 MIN Can't ping the
PE Health
Check device.
Processor Ethernet
(PE) Health Check
device is not
responding. Cannot
ping the PE Health
Check device.
Resolution:
1. Log on to System Management Interface.
2. From the Installation menu, click Configure Server. The Configure Server wizard opens.
3. On the Configure Interfaces screen, verify if IP address for PE Health Check is set to the
gateway address.
4. Execute the Ping diagnostics test to verify that the endpoint used for the PE Health Check
device (the gateway) responds to a ping request. For more information about the Ping
diagnostics test, see the System Management Interface Help.
_PE 2 Minor alarm: PE on other server is not responding.
MO name in log Alarm level Alarm text Description
_PE 2 MIN Can't ping the
other server
over the
network used
by the PE
Interface.
Processor Ethernet
(PE) on the other
server is not
responding. Cannot
ping the other
server over the
network used by
the Processor
Ethernet interface.
Issue 5 May 2009 705