Demand test descriptions and error codes - Avaya Support

Table 62: SPID Facility Test 2 of 2
Test
Result
Description / Recommendation
PASS Display matches administered port address for the endpoint or adjunct.
For BRI endpoints:
1. Verify that the SPID values administered in the switch and the endpoint are
consistent.
2. If the SPID values are correct, replace the endpoint.
3. If test continues to fail, escalate the problem.
For ASAI adjuncts:
1. Verify that the TEI values administered in the switch and the adjunct are
consistent.
2. If the TEI values are correct, consult the recommended repair procedures of
the manufacturer for the adjunct.
3. If test continues to fail, escalate the problem.
The abbreviations used in Service SPID Display have the following meanings:
UU Universal cabinet number (1 – 44 for PNs)
C Carrier (A,B,C,...)
SS Slot (01, 02,...)
pp port (01 – 12)
ext extension one and two (1 – 99999)
SPID service profile identifier
234 Maintenance Alarms for Communication Manager, Media Gateways and Servers
2 of 2