Demand test descriptions and error codes - Avaya Support

ATM-INTF (ATM Interface)
S8700-series Fiber-PNC
ATM-INTF (ATM Interface)
The system recognizes a TN2305/6 as an ATM interface board (ATM-INTF) unless it has an
assigned personality (add atm pnc or add atm trunk). ATM-INTF does not have an
associated maintenance strategy, although the:
● list config and change circuit-pack display information regarding the board
● test board runs an on-demand Control Chel test
● reset board resets the board
Table 38: ATM-EI circuit packs for ATM PNC lists circuit packs that are ATM-EI boards if they
are administered to provide ATM port-network connectivity (ATM PNC).
Note: Always
MO Name in Log Alarm Level Initial Command to Run Full Name of MO
ATM-INTF WRN test board location ATM interface board
Table 38: ATM-EI circuit packs for ATM PNC
Circuit Pack Fiber Echo
Cancellation
TN2305 Multimode Yes
TN2306 Single-mode Yes
Note:
replace an ATM-EI circuit pack with the same type.
Error log entries and recommended actions
Table 39: ATM-INTF Error Log Entries
Error
Type
Aux
Data
Associated Test Alarm
Level
23 (a) 0 None WRN Off
125 (b) None MINOR On
On/Off
Board
217 (c) 0 None WRN Off
Recommended
Action
Issue 5 May 2009 145