Demand test descriptions and error codes - Avaya Support

Maintenance Demand Tests
● AC-POWER
● CABINET (Cabinet Sensors)
● CARR-POW (Carrier Power Supply)
● DC-POWER (Single-Carrier Cabinet Environment)
● EMG-XFER (Emergency Transfer)
● POWER
Table 331: Emergency Transfer Query Test (#124) 1 of 2
Error
Code
Test
Result
Description/Recommendation
1000 ABORT System resources required to run this test are not available.
1. Retry the command at 1-minute intervals a maximum of 5 times.
2000 ABORT Response to the test was not received within the time allowed.
1. Retry the command at 1-minute intervals a maximum of 5 times.
2. If the test continues to ABORT with Error Code 2000, check for
system powering problems with the PN’s A carrier. Resolve every
AC-POWER and CARR-POW (Carrier Power Supply) alarm in a
multicarrier cabinet system or DC-POWER (Single-Carrier Cabinet
Environment) alarm. Repeat the test.
3. If the test continues to ABORT with a 2000 Error Code, resolve every
MAINT (PN Maintenance Circuit Pack) error in a PN. Repeat the test.
2029
2100
2319
2500
1
17
18
20
33
65
289
2
24
90
ABORT Internal system error
1. Retry the command at 1-minute intervals a maximum of 5 times.
FAIL The Emergency Transfer switch is in the OFF position.
1. Place the switch in the AUTO position.
FAIL The Emergency Transfer switch is in the ON position.
1. Place the switch in the AUTO position.
1222 Maintenance Alarms for Communication Manager, Media Gateways and Servers
1 of 2