Demand test descriptions and error codes - Avaya Support

Table 11: Administered Connection Error Log Entries 2 of 2
ADM-CONN Errors
Error Type Aux Data Associated Test Alarm
Level
ADM-CONN (Administered Connection)
17 (e) Any None Any OFF None
18, 102 (f) Any None Any OFF None
22 (a, g) Any None Any OFF None
34, 42, 44, 58 (h) Any None Any OFF None
38, 41 (i) Any None Any OFF None
43, 81 Any None Any OFF None
50 (a) Any None Any OFF None
52 (a) Any None Any OFF None
54 Any None Any OFF None
65, 66, 69 (a) Any None Any OFF None
82 Any None Any OFF None
88 (a) Any None Any OFF None
91, 95, 96, 97,
98, 99, 100, 111
On/Off
Board
Any None Any OFF None
Recommended
action
2 of 2
None of the Administered Connection Error Types have a specific associated test and, except
for errors 17 and 127, are valid only for administered connections established over ISDN-PRI
facilities. Error 127 is valid for administered connections established over non-ISDN facilities or
between two endpoints on the same switch.
Notes:
a. Error Types 1, 16, 22, 50, 52, 65, 66, 69, 88 are typically associated with administration
problems and are not expected to be temporary. The administered connection is not retried
and the failure is alarmed immediately. The alarm threshold specified by the customer is
ignored.
b. Error Types 1, 28: the address of the destination endpoint is: an unassigned number (1),
has an invalid number format (28), or is restricted from terminating calls due to Class of
Restriction (“Access Denied”). Verify that the destination address is correct and that the
destination endpoint is administered. The destination endpoint is not administered on the
switch where this error is logged.
Issue 5 May 2009 51