Demand test descriptions and error codes - Avaya Support

ADX16A-P (AUDIX Analog Line/Control Link)
d. Error Type 257 is an inline error and can only be resolved over time. Ringing voltage is
absent. If only one analog circuit pack in the system has this problem, replace the circuit
pack. If only analog circuit packs on a particular carrier have this error, the ringing generator
may not be connected to this carrier. If analog circuit packs on many carriers have this error,
check the ringing generator.
e. Error Type 513: AUDIX is not available to the switch. Check the AUDIX system, referring to
DEFINITY® AUDIX Maintenance, 585-300-110.
f. Error Type 1025: The TDM bus is out of service. See TDM-BUS (TDM Bus).
Demand test descriptions and error codes
Investigate tests in the order presented. By clearing errors associated with the first test, errors
generated from other tests may also be cleared. Click on the link to see the full description of
the test, error codes, and recommended actions.
Order of Investigation Short Test
Sequence
Tests 36 and 48 ABORT when AUDIX is not running.
Long Test
Sequence
D/ND 1
Analog Looparound Test (#161)) X ND
Conference Circuit Test (#7) X ND
NPE Crosstalk Test (#6) X ND
1. D = Destructive; ND = Nondestructive
Issue 5 May 2009 61