Demand test descriptions and error codes - Avaya Support

Table 300: Looparound and Conference Test (#47) 5 of 5
Error
Code
Test
Result
0 NO
BOARD
Description / Recommendation
ONS Ringer Application Test (#48)
ONS Ringer Application Test (#48)
PASS The port is able to provide an analog transmission path to the station
equipment. Investigate user-reported troubles on this port by using other
port tests, by examining station wiring, by examining the station, and by
ensuring that the terminal is correctly translated as off-premises or
on-premises.
Note: This
The Ringing Application Test applies momentary ringing voltage to the terminal equipment to
determine if the terminal equipment is connected to the port. The test may cause some terminal
equipment to ring briefly during daily maintenance. If this ringing disturbs the customer or the
terminal equipment, disable it using the Tests field on the Station screen. With some software
releases, Tests #6, #7, #35, and #161 are also disabled.
This test is also known as the Station Present Test (#48).
This test runs on the following maintenance objects:
● ADX16A-P (AUDIX Analog Line/Control Link)
● ANL-16-L (16-Port Analog Line)
● AN-LN-PT (Analog Line Port)
● ANL-LINE (8-Port Analog Line)
Note:
test always passes for circuit packs TN712 prior to
vintage 14 and TN742 prior to vintage 6.
See NO BOARD for the repair procedures.
5 of 5
Issue 5 May 2009 1151