Demand test descriptions and error codes - Avaya Support

Maintenance Demand Tests
Table 430: Layer 2 Status Query Test (#647) 1 of 2
Error
Code
Test
Result
Description / Recommendation
1132 ABORT The port location for the primary D-chel is not known. This condition
should not be possible since an administered circuit pack or media
module must be specified when a Signaling Group is administered.
1. Retry the command at 1-minute intervals up to 5 times.
1134 ABORT The associated circuit pack or media module is not administered. This
condition should not be possible since an administered circuit pack or
media module must be specified when a Signaling Group is
administered.
1. Retry the command at 1-minute intervals up to 3 times.
2500 ABORT Internal system error:
1. Retry the command at 1-minute intervals up to 5 times.
1 FAIL Layer 2 of the primary signaling chel is down:
1. Examine the results of the Primary Signaling Link Hardware Check
(#636), and follow recommendations provided there.
2. If Test #636 passes, the Layer 2 Query test may still fail if the
signaling chel at the far end has not been administered correctly or
if the signaling chel has been busied out.
a. Verify that the Primary Signaling Chel (D-chel) at the far end has
been administered correctly.
b. Verify that the port used for the Primary D-chel has not been
busied out at the far end.
2 FAIL Layer 2 of the secondary signaling chel is down.
1. Examine the results of the Secondary Signaling Link Hardware
Check (#639), and follow recommendations provided there.
2. If tests #639 passes, the Layer 2 Query test may still fail if the
signaling chel at the far end has not been administered correctly or
if the signaling chel has been busied out.
a. Verify that the Secondary Signaling Chel (D-chel) at the far end
has been administered correctly.
b. Verify that the port used for the Secondary D-chel has not been
busied out at the far end.
1434 Maintenance Alarms for Communication Manager, Media Gateways and Servers
1 of 2