Demand test descriptions and error codes - Avaya Support

Maintenance Demand Tests
Cabinet Temperature Query Test (#122)
This test queries for the status of the temperature and fan sensors in the cabinet. This test is run
on the following maintenance objects:
● AC-POWER
● CABINET (Cabinet Sensors)
● CARR-POW (Carrier Power Supply)
● EMG-XFER (Emergency Transfer)
● POWER
Table 330: Cabinet Temperature Query Test (#122) 1 of 6
Error
Code
Test
Result
Description / Recommendation
1000 ABORT System resources required to run test are not available.
1. Retry the command at 1-minute intervals up to 5 times.
2000 ABORT Response from the test was not received within the time allowed.
1. Retry the command at 1-minute intervals up to 5 times.
2. S8700-series: If the test continues to abort with Error Code 2000,
check for power problems with the PN’s A carrier.
2029
2319
2500
S8700-series Fiber-PNC: Look for and resolve every AC-POWER and
CARR-POW (Carrier Power Supply) alarm in a multicarrier cabinet
or DC-POWER (Single-Carrier Cabinet Environment) alarm in a
single-carrier cabinet. Repeat the test. If the test continues to abort
with error code 2000, check for and resolve every MAINT (PN
Maintenance Circuit Pack) error in a PN. Repeat the test.
S8700-series IP-PNC:Look for and resolve every RMC-ENV (Power/
Fan Sensors) alarm. Repeat the test.
ABORT Internal system error
1. Retry the command at 1-minute intervals up to 5 times.
1216 Maintenance Alarms for Communication Manager, Media Gateways and Servers
1 of 6