Demand test descriptions and error codes - Avaya Support

o. Error Types 3842 - 3942: These Error Types report certain error messages received by the
SIP Signaling Group for one of its associated D-Chels. The aux data field shows for which
D-Chel the message was received.
The generated error code is represented by the value 3840+x, where “x” is the Cause
Value. The Cause Value provides additional data that may be useful when tracking down
obscure networking and routing problems.
Table 230: Descriptions and Recommendations for Error Types 3842-3942 provides a
description of the error code and the recommended actions to troubleshoot the problem.
Table 230: Descriptions and Recommendations for Error Types 3842-3942 1 of 10
Error
Code
Description/Recommendation
3842 Cause Value 2. A request has been made to use a transit network or common
carrier that cot be accessed. The equipment sending this cause event does not
recognize the transit network.
1. From the circuit pack or media module and port number (in the Aux Data
field), determine the trunk group against which the error was reported.
2. Check every routing pattern containing this trunk group for validity of
interexchange carriers requested (IXC field).
832 Maintenance Alarms for Communication Manager, Media Gateways and Servers
1 of 10