Demand test descriptions and error codes - Avaya Support

Maintenance Demand Tests
For EI-to-EI fiber links, this test is run on both EI circuit pack endpoints of the fiber link. This test
runs on EXP-INTF (Expansion Interface Circuit Pack) and FIBER-LK (Fiber Link).
Table 374: Expansion Interface Fiber Out-of-Frame Query Test (#238) 1 of 2
Error
Code
Test
Result
Description / Recommendation
ABORT Internal system error.
1. Retry the test at 1-minute intervals up to 5 times.
1033 ABORT The EI circuit pack does not have a fiber link administered to it. There is not
sufficient data to run test. Because test fiber-link was run, the
expansion interface should be administered on a fiber link, therefore this
must be a software problem.
2000 ABORT Response to the test was not received within the allowed time.
1. Retry the test at 1-minute intervals up to 5 times.
2100 ABORT System resources required to run this test are not available.
1. Retry the test at 1-minute intervals up to 5 times.
2500 ABORT Internal system error
1. Retry the test at 1-minute intervals up to 5 times.
1310 Maintenance Alarms for Communication Manager, Media Gateways and Servers
1 of 2