Demand test descriptions and error codes - Avaya Support

Table 546: Power Supply Temperature Test (#1537) 2 of 2
Error
Code
1
2
3
Test
Result
Power Supply Temperature Test (#1537)
FAIL The inlet temperature is over threshold.
The exhaust temperature is over threshold.
Both the inlet and the exhaust temperatures are over threshold.
1. Enter test board location to check the temperature.
2. If redundant power supplies are present, there may be a problem
with the backplane. Verify that each power supply can detect the
problem by using recycle carrier, specifying the slot number
of the power supply to be shut down. Refer to the notes and
cautions for this command in Maintenance Commands for Avaya
Aura Communication Manager, Media Gateways and Servers
(03-300431) before executing recycle carrier.
3. Replace the power supply.
4. If the problem persists, check the backplane for shorts.
4 FAIL There is a hot spot temperature warning.
8 FAIL There is a hot spot temperature shutdown.
0 NO
BOARD
Description and recommendation
PASS The inlet, exhaust, and hot spot temperatures are within limits.
The power supply is administered but not detected.
1. Verify that the power supply is plugged in.
2. Replace the power supply.
2 of 2
Issue 5 May 2009 1703