Demand test descriptions and error codes - Avaya Support

The Aux Data field indicates the following:
Table 251: Aux Data, Error Type 257
Aux Data Description
1 No C-LAN port available. See CLAN-BD (Control LAN Circuit Pack) for
explanation.
3, 4 Time-out during setup attempt. Most likely due to problem with physical link
or printer status.
5 Internal system error. Most likely temporary/sporadic failure.
2, 6 The data module the printer is trying to use is busy with another call. Use
status data module to determine when the port is available for testing.
See Procedures for Restoring the System Printer Link for recommended maintenance
strategy.
c. Error Type 513: the SYS-PRNT was interrupted for one of the following reasons:
● The cable to the SYS-PRNT output device is disconnected
● The SYS-PRNT output device is powered off
● The data extension to which the SYS-PRNT output device connects has been busied
out
● Internal software error
Check the connectivity of the wires and cables among the wall jacket, data module, and
SYS-PRNT output device. Follow the instructions in Procedures for Restoring the System
Printer Link.
Demand test descriptions and error codes
Investigate tests in the order presented. By clearing errors associated with the first test, errors
generated from other tests may also be cleared. Click on the link to see the full description of
the test, error codes, and recommended actions.
Order of Investigation Short Test
Sequence
Long
Sequence
D/ND
Link Tear Down Test (#213) X Destructive
Link Retry Test (#215) X X Non-Destructive
932 Maintenance Alarms for Communication Manager, Media Gateways and Servers