Demand test descriptions and error codes - Avaya Support

Maintenance Demand Tests
Table 424: BRI Layer 3 Query Test (#629) 3 of 3
Error
Code
Test
Result
Description / Recommendation
2069 ABORT The endpoint has returned an error response to the switch sent
application message.
1. Retry the command at 1-minute intervals up to 5 times.
2. If the test continues to abort, escalate the problem.
2000 FAIL No response is received from the endpoint or the adjunct. For BRI
endpoints:
1. Consult the endpoint’s documentation to determine whether
ISDN-BRI Management and Maintenance Procedures are
supported. If not supported, use change station extension
to change the MIMs Supported field to n. Enter busyout
station extension and release station extension to
busyout and release the endpoint to resolve any endpoint alarms
resulting from failure of this test.
2. If the endpoint supports these procedures and the test continues to
fail, assume the endpoint is defective and replace it.
PASS The endpoint has successfully responded to the switch’s application
message.
1424 Maintenance Alarms for Communication Manager, Media Gateways and Servers
3 of 3