Demand test descriptions and error codes - Avaya Support

Maintenance Demand Tests
Table 289: Local Loop Test (#13) 6 of 9
Error
Code
Test
Result
Description / Recommendation
7 FAIL The Conference Test failed on the primary chel.
M/T-ANL:
1. Check the Tone Clock and the Tone Detector circuit packs by
entering test board location for these circuit packs.
2. Resolve any problems detected on the Tone-Clock or Tone
Detector circuit pack and retest.
3. If the Tone Clock and Tone Detector circuit packs are functioning
properly and the test still fails, replace the Maintenance/Test circuit
pack.
For all other Maintenance Objects:
1. Check the Tone Generator and the Tone Detector circuit packs by
entering test board location for these circuit packs.
2. Resolve any problems detected on the Tone Generator and Tone
Detector circuit packs and retest.
3. If the Tone Generator and Tone Detector circuit packs are
functioning properly and the test still fails:
ADX8D-PT and ADX16D-P: Shut down AUDIX and replace
the EMBEDDED AUDIX circuit pack.
DIG-LINE, E-DIG-ST, PDMODULE, and TDMODULE:
Replace the Digital Line circuit pack.
M/T-DIG: Replace the Maintenance/Test circuit pack.
1112 Maintenance Alarms for Communication Manager, Media Gateways and Servers
6 of 9