Demand test descriptions and error codes - Avaya Support

Demand test descriptions and error codes
Investigate tests in the order presented. By clearing errors associated with the first test, errors
generated from other tests may also be cleared. Click on the link to see the full description of
the test, error codes, and recommended actions.
Table 120: Tests Run for an EI-to-EI Fiber Link
Order of Investigation Short Test
Sequence
1. D = Destructive; ND = Nondestructive
Long Test
Sequence
466 Maintenance Alarms for Communication Manager, Media Gateways and Servers
Reset Fiber
Sequence
D/ND 1
Expansion Interface Fiber Out-of-Frame
Query Test (#238)
X X ND
Expansion Interface Neighbor Query
Test (#237)
X X ND
Fiber Link Reset Test (#768) X D
Table 121: Tests Run for an EI-to-SNI Fiber Link
Order of Investigation Short Test
Sequence
1. D = Destructive, ND = Nondestructive
Long Test
Sequence
Reset Fiber
Sequence
Expansion Interface Fiber Out-of-Frame
Query Test (#238)
X X ND
Expansion Interface Neighbor Query Test
(#237)
X X ND
Configuration Audit (#759) X X ND
Failure Audit (#777) X X ND
SNI Fiber Out of Frame Query Test (#989) X X ND
SNI Destructive Facility On-board Test
(#757)
X D
SNI Destructive Facility Off-Board Test
(#756)
X D
Fiber Link Reset Test (#768) X D
D/ND 1