Demand test descriptions and error codes - Avaya Support

Maintenance Demand Tests
Table 440: SNI-BD Configuration Audit (#759) 4 of 6
Error
Code
Test
Result
Description / Recommendation
133 FAIL No neighbor link is administered, but the SNI has an EI neighbor.
1. Administer the SNI on a fiber link to the EI neighbor it is connected to
using add fiber-link next. Or remove both fiber endpoints
(i.e., this SNI and its EI neighbor) and remove the fiber endpoints
from circuit pack administration using change circuit-pack.
134 FAIL No neighbor link is administered, but the SNI has an SNI neighbor.
1. Administer the SNI on a fiber link to the SNI neighbor it is connected
to using add fiber-link next. Or remove both fiber endpoints
(i.e., this SNI and its SNI neighbor) and remove the fiber endpoints
from circuit pack administration using change circuit-pack.
135 FAIL The SNI circuit pack cot communicate with its neighbor. The SNI has an
administered neighbor, but cot communicate with its neighbor.
1. Check if the administered neighbor is inserted. If not, insert the
neighbor circuit pack.
2. Perform the Fiber link fault isolation procedure in Maintenance
Procedures for Avaya Aura Communication Manager, Media
Gateways and Servers (03-300432).
136 FAIL The SIN’s administered neighbor does not match the physical neighbor
connected. The type of neighbor administered is an SNI and the type of
neighbor physically connected is an EI.
1. Enter list fiber-link, and verify that the fiber-optic and metallic
cable connections are installed as administered.
137 FAIL The SNI’s administered neighbor does not match the physical neighbor
connected. The type of neighbor administered is an EI and the type of
neighbor physically connected is an SNI.
1. Enter list fiber-link, and verify that the fiber-optic cable and
metallic cable connections are installed as administered.
1476 Maintenance Alarms for Communication Manager, Media Gateways and Servers
4 of 6