Demand test descriptions and error codes - Avaya Support

Table 440: SNI-BD Configuration Audit (#759) 3 of 6
Error
Code
102 -
109,
113-
120
Test
Result
Description / Recommendation
Configuration Audit (#759)
FAIL The SNI circuit pack cot communicate with the SNI in a different slot.
1. Determine the slot number of the other SNI: Subtract 100 from the
Error Code. For example, if the Error Code is 107, the SNI slot
number is 7. This number is referred to as the "specified SNI slot".
2. Perform the Fiber link fault isolation procedure in Maintenance
Procedures for Avaya Aura Communication Manager, Media
Gateways and Servers (03-300432). This will resolve multiple
SNI-PEER errors.
3. See Table 435: SNI Slot / Error Type to determine the Error Type for
SNI-PEER errors. For example, if the specified SNI slot is 9, the
Error Type is 1793. If the SNI being tested has SNI-PEER errors of
the specified Error Type, replace the SNI being tested. Replacing an
SNI may be service interrupting. See SNI-BD (SNI Circuit Pack) for
the procedure for replacing an SNI. To view SNI-PEER errors, enter
display errors with category PNC-PEER. Retry the command.
4. If the SNI being tested has SNI-PEER errors of the specified Error
Type, replace the SNI in the specified SNI slot. Retry the command.
112 FAIL The SNI circuit pack cot communicate with the active SNC.
1. Check the error log for other SNI circuit packs in the same carrier
with a 257 SNI-BD error. Enter display errors with category
PNC to view SNI-BD errors. If other SNI circuit packs in the same
switch node carrier have error 257, then replace the active SNC in
this switch node carrier. Replacing an SNC may be service
interrupting. See SNC-BD (Switch Node Clock Circuit Pack) for the
procedure for replacing an SNC. If other SNI circuit packs in the
same carrier do not have SNI-BD Error Type 257 logged, proceed to
step 2.
2. Replace this SNI. Replacing an SNI may be service interrupting. See
SNI-BD (SNI Circuit Pack) for the procedure for replacing an SNI.
3. Replace the active SNC in the same switch node carrier. Replacing
an SNC may be service interrupting. See SNC-BD (Switch Node
Clock Circuit Pack) for the procedure for replacing an SNC.
3 of 6
Issue 5 May 2009 1475