Demand test descriptions and error codes - Avaya Support

Investigate any alarms against SN-CONF, SNI-BD, FIBER-LK. The last two digits of the
Error Code indicate the fiber-link number of the fiber that reported the retired alarm. Use
list fiber-link to show the location of the fiber.
q. Error Type 20000 – 20063: a spontaneous PNC interchange took place in response to the
retiring of an alarm on the B-PNC associated with fault class FC_EAL. Use status pnc to
look at the state of health indexes for the PNCs, and investigate any associated alarms.
Adding 1 to the last two digits of the Error Code gives the PN number of the port network
that reported the retired alarm. (20003 points to port network 4.) Use list config
port-network to show the cabinet number associated with a port network.
r. Error Type 20100 – 20163: a spontaneous PNC interchange took place in response to the
retiring of an alarm on the B-PNC associated with fault class FC_INL. Use status pnc to
look at the state of health indexes for the PNCs, and investigate any associated alarms.
Adding 1 to the last two digits of the Error Code gives the PN number of the port network
that reported the retired alarm. (20103 points to port network 4.) Use list config
port-network to show the cabinet number associated with a port network.
s. Error Type 20200 – 20263: a spontaneous PNC interchange took place in response to the
retiring of an alarm on the B-PNC associated with fault class FC_HW. Use status pnc to
look at the state of health indexes for the PNCs, and investigate any associated alarms.
Adding 1 to the last two digits of the Error Code gives the PN number of the port network
that reported the retired alarm. (20203 points to port network 4.) Use list config
port-network to show the cabinet number associated with a port network.
t. Error Type 20300 – 20363: a spontaneous PNC interchange took place in response to the
retiring of an alarm on the B-PNC associated with fault class FC_PER. Use status pnc to
look at the state of health indexes for the PNCs, and investigate any associated alarms.
Adding 1 to the last two digits of the Error Code gives the PN number of the port network
that reported the retired alarm. (20303 points to port network 4.) Use list config
port-network to show the cabinet number associated with a port network.
u. Error Type 20400 – 20463: a spontaneous PNC interchange took place in response to the
retiring of an alarm on the B-PNC associated with fault class FC_DS1. Use status pnc to
look at the state of health indexes for the PNCs, and investigate any associated alarms.
Adding 1 to the last two digits of the Error Code gives the PN number of the port network
that reported the retired alarm. (20403 points to port network 4.) Use list config
port-network to show the cabinet number associated with a port network.
v. Error Type 20500 – 20563: a spontaneous PNC interchange took place in response to the
retiring of an alarm on the B-PNC associated with fault class FC_BFD. Use status pnc to
look at the state of health indexes for the PNCs, and investigate any associated alarms.
Adding 1 to the last two digits of the Error Code gives the PN number of the port network
that reported the retired alarm. (20203 points to port network 4.) Use list config
port-network to show the cabinet number associated with a port network.
w. Error Type 20600 – 20664: a spontaneous PNC interchange took place in response to the
retiring of an alarm on the B-PNC associated with fault class FC_SNIL. Use status pnc to
look at the state of health indexes for the PNCs, and investigate any associated alarms. The
last two digits of the Error Code indicate the fiber-link number (01-27) of the fiber that
reported the retired alarm. Use list fiber-link to show the location of the fiber.
770 Maintenance Alarms for Communication Manager, Media Gateways and Servers