Demand test descriptions and error codes - Avaya Support

Maintenance Demand Tests
Table 411: TSC Heartbeat Inquiry Test (#604)
Error
Code
Test
Result
Description / Recommendation
1147 ABORT The ADM TSC is being torn down.
1. Enter status tsc-administered at 1-minute intervals up to 3
times.
2. If ADM TSC is still down, disable and enable the ADM TSC using
change signaling-group grp#.
NOTE: To disable the ADM TSC, display the Signaling Group
administration screen using change signaling-group grp#,
where grp# refers to the number of the signaling group under which
the suspect TSC is administered. Set the Enable field to n. To
enable the ADM TSC, set the Enable field to y.
3. If the ADM TSC is still down, check the other nodes in the network.
1148 ABORT The ADM TSC is enabled, but inactive at the near end.
1. Disable and enable the ADM TSC.
2. Enter test tsc-administered.
3. If the ADM TSC is still inactive, check the other nodes in the network.
1149 ABORT The ADM TSC is disabled.
1. Enable the TSC, and see if the status indicates active.
2. Enter test tsc-administered.
3. If the TSC still disabled, remove the ADM TSC from the system.
1181 ABORT Ran out of ADM TSC resources.
1. Enter test tsc-administered at 1-minute intervals up to 3
times.
1394 Maintenance Alarms for Communication Manager, Media Gateways and Servers
3 of 4