Demand test descriptions and error codes - Avaya Support

Demand test descriptions and error codes
MAPD-BD (MAPD Interface Circuit Pack)
Investigate tests in the order presented. By clearing errors associated with the first test, errors
generated from other tests may also be cleared. Click on the link to see the full description of
the test, error codes, and recommended actions.
Order of Investigation Apply to
TN802? 1
Short Test
Sequence
Long Test
Sequence
Reset
Board
Sequence
NPE Audit Test (#50) Y X ND
Control Chel Looparound Test (#52) Y X ND
Loss of Signal Alarm Inquiry Test (#138) N X X ND
Blue Alarm Inquiry Test (#139) N X X ND
Red Alarm Inquiry Test (#140) N X X ND
Yellow Alarm Inquiry Test (#141) N X X ND
Major Alarm Inquiry Test (#142) N X X ND
Minor Alarm Inquiry Test (#143) N X X ND
Slip Alarm Inquiry Test (#144) N X X ND
Misframe Alarm Inquiry Test (#145) N X X ND
DS1 Translation Update Test (#146) N X X ND
SAKI Sanity Test (#53) Y X D
1. N = No; this test either passes or ABORTS with Error Code 2000 (problem with NT)
2. D = Destructive; ND = Nondestructive
D/ND 2
Issue 5 May 2009 607