Demand test descriptions and error codes - Avaya Support

Table 416: Level 1 Status Inquiry Test (#621) 4 of 4
Error
Code
Test
Result
Description / Recommendation
Electronic Power Feed Inquiry Test (#622)
Electronic Power Feed Inquiry Test (#622)
4 FAIL For the TN2198 only:
Received a status of Level 1 Pending Activation, the NT1 has a loss of
power indicating a problem with the NT1.
1. For the NT1 follow the manufacturers recommended repair
procedures.
2. Enter test port location, and review the results of the Level 1
Status Inquiry test to verify the repair. If the test is still failing,
escalate the problem.
PASS Level 1 is activated or the system has taken the port out of service.
This test queries the BRI-LINE circuit pack for the status of the Electronic Power Feed (EPF)
supplied to a BRI endpoint or an ASAI or Avaya adjunct. If the EPF is on and no overcurrent
condition exists, this test passes. All other states are not normal and indicate a problem with the
endpoint or adjunct, the wiring to the endpoint or adjunct, or the BRI-LINE circuit pack. This test
is not run on the TN2208 circuit pack or the TN2198 and will always return a pass for the
TN2198. The TN2208 has no power feeds
This test runs on BRI-PORT (ISDN-BRI Port).
Table 417: Electronic Power Feed Inquiry Test (#622) 1 of 2
Error
Code
Test
Result
Description / Recommendation
4 of 4
1005 ABORT This test is not valid for this port type. Ports on the TN2208 cot run this test
because this board does not have an electronic power feed. This error can
be ignored.
1 of 2
Issue 5 May 2009 1407