Demand test descriptions and error codes - Avaya Support

Error log entries and recommended actions
Table 199: NR-REG Error Log Entries
Error
Type
Aux
Data
Associated Test Alarm
Level
Notes:
a. Error Type 1: The percentage of hyperactive media-gateways in a network region exceeds
the administered percentage.
1. Enter disable nr-registration network-region so that gateways and IP
phones in the specified network region will register to an LSP. The registration of the IP
network endpoints to a server is being disabled, not the IP network region itself. The
use of this command is a temporary recovery action, not a corrective action.
2. After the network problem has been corrected, enter enable nr-registration
network-region to enable registration of the IP network endpoints to a server. This
will allow them to re-register with the main server depending upon the administered
Recovery Rule specified on the change media-gateway form.
b. Error Type 257: Registrations for the network region are currently disabled. Enter
enable nr-registration network-region to enable registration of the ip-network
endpoints to a server.
Demand tests descriptions and error codes
There are no demand tests for NR-REG.
On/Off
Board
1 (a) MIN OFF
Recommended Action
257 (b) WRN OFF enable nr-registration
network-region
694 Maintenance Alarms for Communication Manager, Media Gateways and Servers