Demand test descriptions and error codes - Avaya Support

ATM-EI (Expansion Interface Circuit Pack)
y. Error Type 3999: The circuit pack sent a large number of control chel messages to the
switch within a short period of time.
If Then
Error Type 1538 is also The circuit pack is taken out of service
present
Error Type 1538 is absent The circuit pack is not taken out of service, but has
generated 50% of the messages necessary to be
considered hyperactive.
This can be normal during heavy traffic.
If the error is logged during light traffic, it can indicate a
problem with the circuit pack or the equipment attached to it.
z. Aux Data 32767 for any error log entry indicates that an alarmed ATM-EI was busied out
and then released. When this occurs, existing service-affecting alarms must be preserved.
Typically, every alarm is resolved when the ATM-EI is released. Therefore, the Alarm and
Error Logs must be repopulated with the alarms present at time of busyout. This Aux Data
indicates that existing Error Type and Error Log time stamps are no longer valid because
they were lost when the circuit pack was released.
Demand test descriptions and error codes
Investigate tests in the order presented. By clearing errors associated with the first test, errors
generated from other tests may also be cleared. Click on the link to see the full description of
the test, error codes, and recommended actions.
Order of Investigation Short Test
Sequence
Long Test
Sequence
ATM Board Time Of Day Update (#1261) X ND
Expansion Interface Control Chel Test (#316) X X ND
Packet Interface Test (#598) X X ND
ATM Board DSP Test (#1293) X X ND
Expansion Interface 2-Way Transmission Test (#241) X X ND
ATM Board Framer Looparound Test (#1260) X D
ATM Crosstalk Test (#1298) X ND
D/
ND 1
1 of 2
Issue 5 May 2009 143