Demand test descriptions and error codes - Avaya Support

Maintenance Demand Tests
1. The values of these failure codes might be added together. For example, a value of 36 indicates that the
ringer generator is inactive because of a short and that the ring generator has an internal fault.
Reset Environmental Maintenance Test (#1545)
This test resets the environmental maintenance on the TN2312BP IPSI board for CAB-MTCE
(Media Gateway Maintenance).
Table 550: Reset Environmental Maintenance Test (#1545) 1 of 2
Error
Code
Test
Result
Description and recommendation
1000 ABORT Internal software problem.
1. Repeat the command at one-minute intervals 1 to 3 times.
1982 ABORT The board being tested is NOT a TN2312BP IPSI or later.
1. Insert a TN2312BP IPSI circuit pack.
1986 ABORT The TN2312BP IPSI failed to set emergency transfer to AUTO at
initialization.
1. Enter reset maintenance
2. If the reset maintenance command aborts again, enter
set emergency to see if emergency transfer can be activated or
deactivated.
3. If the reset maintenance command continues to abort, escalate the
problem.
2000 ABORT The response to a query was not received in the time allowed.
1. Run reset maintenance
2. Escalate the problem if the test continues to abort.
2500 ABORT An internal operation failed. Possible unknown cabinet type.
1. Repeat the command at one-minute intervals up to 3 times.
2. Escalate the problem if the test continues to abort.
1 FAIL The TN2312BP IPSI environmental maintenance initialization failed.
1. Repeat the command at one-minute intervals 1up to 3 times.
1708 Maintenance Alarms for Communication Manager, Media Gateways and Servers
1 of 2