Demand test descriptions and error codes - Avaya Support

g. Error Type 1281, 1290–1295: critical hardware or firmware error.
If the switch detects: Then the switch:
1 error, Resets circuit pack.
3 errors in 15 minutes, Raises MINOR alarm.
Error Type descriptions are as follows:
1290 Global HDLC error
1291 Main RAM/ROM error
1292 CPU error
1293 Insane on-board processor
1294 On-board translation RAM error
1295 (Aux 3) RSCL link down
(Aux 0) RSCL keepalive failure
1. Attempt to clear the alarm (reset board location).
2. If the alarm persists, replace the circuit pack.
h. Error Type 1537, 1796: a hyperactive VAL circuit pack has exceeded the error threshold
and has been removed from service.
1. Attempt to clear the alarm (reset board location).
2. If the error recurs within 15 minutes, replace the circuit pack.
i. Error Type 1794: packet bus transmit buffers have overflowed.
1. Attempt to clear the alarm (reset board location).
2. If the error recurs within 15 minutes, replace the circuit pack.
j. Error Type 1798: unable to write translation RAM.
1. Attempt to clear alarm (reset board location).
2. If the alarm recurs within 15 minutes, replace the circuit pack.
k. Error Type 2049: packet Interface test (#598) failed.
1. Attempt to clear the alarm (test board location l r 3).
2. If alarm does not clear, reset the circuit pack (reset board location).
3. If circuit pack resets, execute Packet Interface test (#598) several times.
4. If Packet Interface test (#598) continues to fail, replace the circuit pack.
1044 Maintenance Alarms for Communication Manager, Media Gateways and Servers